Specifications

Green button when in SAT/CBL and TV

modes also disc menu for DVD when in

shift mode

Yellow button when in SAT/CBL and TV

modes also zoom when in shift mode

Blue Button when in SAT/CBL and TV

modes

-/-- also LAST in shift mode to return to

the previous channel

Favorites channel also ENTER when in

shift mode

AV Equipment Selection by Entering Device Code

You may setup the Z-URC

550EU by following the code entering

instructions:

1. Referring to the DEVICE CODE LIST, look up the 4-digit Device

Code which corresponds to the brand of your A/V equipment. If

there is more than one Device Code listed under your brand, start

from the first code.

2. Press the desired Device Mode Key (e.g. TV).

3. Press and hold "CH +" and "VOL -" on the Z-URC

550EU

simultaneously for 3 seconds until the green indicator lights up.

4. Use the number keys "0" - "9" to enter your 4-digit Device Code.

The indicator flashes twice then goes out.

Turn on your device (e.g. TV), then try the function keys on the Z-

URC

550EU. If your device (e.g. TV) responds to your activated

function correctly, you have entered the right Device Code. Otherwise,

repeat the above steps with the next available Device Codes until your

device (e.g. TV) responds to your activated function, and most keys

work correctly.

• Simply repeat the above procedures to enter the Device Codes for

your SAT/CBL, DVD or AUX. (Remember to press the correct

Device Mode Key in step 2 above)

Note: If the red indicator flashes 6 times in step 4, a wrong Device

Code has been entered. You are required to repeat step 2 to 4 again.