Datasheet

Model
Description
Rev.
Page
ICP543759PMT Lithium-ion Polymer Battery Pack Rev.0.0 3/13
4.Outline Dimension
See attached drawing for ICP543759PMT (Fig. 1). The thickness is the maximum
thickness after 500 cycles.
5. Appearance
Free from deformation, damage, noticeable scratch, flaw, rust, discoloration or electrolyte
leakage.
6. Standard Test Condition
6.1 Environmental Conditions
Unless otherwise specified, all tests shall be conducted within one month of delivery at the
temperature 23±5℃ and the relative humidity 65±20 %.
6.2 Test Equipments
(1) Ammeter and voltmeter
The ammeter and voltmeter shall have an accuracy of ± 0.1mA and ± 0.1mV, respectively.
(2) Slide caliper
The slide caliper shall meet with JIS B7507 standard（slide caliper）and have a scale of 0.01
mm.
(3) Impedance meter
The impedance meter shall be operated at 1 kHz.
7. RoHs compliance is for all parts.
E ngineering specification subject to changes without notice.