Datasheet

Model
Description
Rev.
Page
ICP543759PMT
Lithium-ion Polymer Battery Pack Rev.0.0 5/13
Charge: CC- 0.5C,
CV-4.2V, Cut-off
current: 0.05C
8.8 Charge/Discharge Cycle
Life
0.5C
Discharge: 0.5C to 3.0V
Discharge capacity should
be≧80% of 1
st
cycle
capacity @ 500
th
cycle.
Rest for 10 minutes
between each
charge/discharge step.
8.9 Leakage Proof The fully charged battery shall be stored at
65±3℃and relative humidity 95±5% for 7
days.
No leakage.
8.10 Temperature
Characteristics
1)Charge:CC/CV,CC-0.5C,CV-4.2V
Cut-off 0.05C at 23±3℃.
2)Discharge: 0.5C to 3.0V at -10±3℃and
～60±3℃, respectively. Hold for
1 hour after standard charging.
Discharge capacities should
be ≧60% for -10±3℃ and
≧95% for 60±3℃.
8.11 Self Discharge Capacity after 30days storage, measured
under the same conditions as 23±5℃and
relative humidity 65±20﹪environmental
test conditions.
Data is collected by fully charging the
battery, measuring the initial capacity
(discharging), recharging the battery,
storing the battery, and then measuring the
residual capacity after storing.
Residual capacity
≧1134mAh
9. PCM（
（（
（Protection Circuit Module）
））
）SPECIFICATIONS：
：：
： (Fig.2)
9.1 Operating input voltage
1.5 – 12V
9.2 Current consumption (Operation)
≦ 6 µA
9.3 Over-charge threshold voltage（Latch Mode）
4.28V ± 25mV
9.4 Over-discharge threshold voltage 2.8V± 80mV
9.5 Discharge Current Protection 2.5~6A
9.6 On-State Resistance (VB = 3.7V)
≦200 mΩ
9.7 Dimensions 28.4× 4.3 × 2.0 m/m
E n gineering specification subject to changes without notice.