Owner’s Manuals

3
4
5
6
6
QXBIUDB*T[G 3DJH 
nu654-6 - CLIO II
C:\Documentum\Checkout\nu654-6_eng_T1.WIN 4/11/2002 13:44
-page22
1.14
SEAT BELTS (continued)
Adjusting the height of the front
seat shoulder strap
Move button 3 to adjust the belt so
that the shoulder strap 1 is positioned
as described above.
After making the adjustment, ensure
the belt is correctly locked.
Locking
Unwind the belt slowly and smoothly
ensuring the buckle 4 clips correctly
into housing 6 (check it is locked by
pulling on buckle 4). If the belt jams,
allow it to return slightly before
unwinding it again
Locking (continued)
If the belt is jammed completely:
- pull slowly but firmly, to unwind
just over an inch (approximately
3cm);
- allow the belt to rewind by itself;
- unwind the belt once more;
- if the problem persists, consult your
RENAULT Dealer.
Driver's seat belt not
fastened warning light
If the driver's seat belt is
unfastened this lights up, and,
when the vehicle reaches a speed of
approximately 6 mph (10 km/h), it
will flash and a beep will sound
for approximately 90 seconds
before the light returns to being
permanently lit.
Unlocking
Press button 5 on housing 6. The belt
will rewind by itself.
Hold the buckle to help the action.