Owner’s Manuals

1
4
3
5
2
6
QXBIUDB*T[G3DJH
nu654-6 - CLIO II
C:\Documentum\Checkout\nu654-6_eng_T2.WIN 30/10/2002 12:06
-page13
2.13
QUICKSHIFT 5 GEARBOX
Selector lever
1 Mode selection button: enables
you to move from manual mode to
automatic mode or from
automatic to manual mode at any
time with the engine running.
Note: The selector lever
automatically returns to the middle
position after use.
Display
2 automatic mode
3 brake pedal depressed warning
light
4 gear display
5 not used
6 gearbox fault warning light.
Thegearused(1, 2.., 5, N, R)is
indicated in the instrument panel
display. In automatic mode, (A) is
also displayed.
Driving
Switch on the ignition.
The display lights up on the
instrument panel.
As long as neutral is displayed (N),
start the engine but do not depress
the accelerator.
If a gear other than neutral (N) is
displayed this will flash; it will only
be possible to start the engine if you
press down the brake pedal (the
warning light 3 will come on if you
forget) when holding the key in
starting position.
The vehicle will then change to
neutral (N) automatically and the
engine will start.
Note: do not attempt to start the
engine by pushing the vehicle if the
battery is flat (the display remains
off when the ignition is switched
on).