Owner’s Manuals

QXBIUDB*T[G3DJH

nu654-6 - CLIO II

C:\Documentum\Checkout\nu654-6_eng_T2.WIN 30/10/2002 12:06

-page22

2.22

CRUISE CONTROL - SPEED LIMITER: limiter function (continued)

Switching on

Press the side switch 1

The indicator light lights up in the

instrument panel and the on-board

computer enters speed limiter

mode.

Limiting the speed

At a stable speed (approximately

20 mph or 30 km/h) and in the

correct gear (for vehicles with

manual gearboxes), press switch 2:

the speed is stored.

Driving

When a limited speed is stored,

press on the accelerator pedal until

you reach the limited speed.

From this point, no effort on the

accelerator pedal will allow you to

exceed the programmed speed

except in an emergency (see

information on exceeding the

limited speed).

Changing the limited speed

The limited speed may be changed

by acting (pressing frequently or

continuously) on:

-button2 to increase speed,

-button5 to reduce speed.

If the car has the temporary display

function, the limited speed is

displayed for approximately 30

seconds.