Specifications

11A-20
TOP AND FRONT OF ENGINE
Timing belt: Removal - Refitting
K4M
11A
a Position the adjustable index (11) opposite the mark
(12) , by turning the eccentric (13) clockwise using a
6 mm Allen key.
a Torque tighten the timing tensioning roller nut (7
N.m).
a Refit the toolon the cylinder block.
a - Lower timing cover with a timing flap
a Refit the lower timing cover (14) .
a Tighten to torque the lower timing cover bolts (12
N.m).
b - continuation of the refitting procedure
regardless of the type of lower timing cover
a Refit a new crankshaft accessories pulley.
103263
Note:
There are two types of lower timing cover:
- without a timing flap,
- with a timing flap.
130497