Specifications

12A-9
FUEL MIXTURE
Air filter unit: Removal - Refitting
K4M
12A
- the plastic rivets and clips every time they are re-
moved.
II - REFITTING OPERATION
a Refit:
- the air filter unit,
- the two air filter unit bolts.
a Torque tighten the air filter unit bolts (9 N.m).
a Attach the electrical wiring to the oxygen sensor.
a Refit the coolant pipes mounting bracket.
a Reclip:
- the breather,
- the coolant pipes.
a Refit:
- the filter element,
- the two air filter cover bolts.
a Reconnect:
- the brake servo vacuum pipe on the inlet distribu-
tor,
- the petrol vapour recirculation pipe,
- the throttle position potentiometer connector,
-the idle speed regulation stepping motor connec-
tor.
III - FINAL OPERATION
a Refit the air resonator (see 12A, Fuel mixture, Air
resonator: Removal - Refitting, page 12A-2) .
a Connect the battery (see Battery: Removal - Refit-
ting) (80A, Battery).