Specifications

13B-16
DIESEL INJECTION
Venturi: Removal - Refitting
K9K
13B
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Disconnect the battery (see Battery: Removal - Re-
fitting) (80A, Battery).
a Remove the front engine cover.
a Remove the dipstick guide and filler neck nuts (1) .
a Put the dipstick guide to one side (2) .
a Disconnect the diesel supply and return pipes (3) .
Equipment required
Diagnostic tool
Tightening torquesm
Venturi bolt 6 N.m
IMPORTANT
To avoid all risk of damage to the systems, apply
the safety and cleanliness instructions and opera-
tion recommendations before carrying out any
repair (see Diesel injection: Precautions for the
repair) .
IMPORTANT
Before carrying out any work on the injection sys-
tem, check using the Diagnostic tool :
- that the injector rail is not under pressure,
- that the fuel temperature is not too high.
It is essential to respect the safety and cleanliness
advice whenever work is carried out on this system.
Working on the circuit with the engine running is
strictly forbidden.
IMPORTANT
Wear leaktight gloves (Nitrile type) for this opera-
tion.
Note:
Ensure that you have a new Venturi before opening
up the fuel circuit.
24733
24752