Specifications

13C-1
PREHEATING
Pre-postheating unit: Removal - Refitting
K9K
13C
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Disconnect the battery (see Battery: Removal - Re-
fitting) (80A, Battery).
II - REMOVAL OPERATION
a Disconnect the pre-postheating unit connector (1) .
a Remove:
- the bolt (2) from the pre-postheating unit,
- the pre/postheating unit (3) .
REFITTING
I - REFITTING OPERATION
a Refit the pre-postheating unit.
a Tighten to torque the pre-postheating unit bolt (8
N.m).
a Connect the pre-postheating unit connector.
II - FINAL OPERATION
a Connect the battery (see Battery: Removal - Refit-
ting) (80A, Battery).
Tightening torquesm
pre-postheating unit bolt 8 N.m
24729