Specifications

17B-8
PETROL INJECTION
Petrol injection computer: Removal - Refitting
K4M
17B
REFITTING
I - REFITTING OPERATION
a Refit the injection computer.
a Torque tighten the injection computer nuts (8
N.m).
a Connect the two connectors of the injection comput-
er.
II - FINAL OPERATION
a Refit the channel.
a Connect the battery (see Battery: Removal - Refit-
ting) (80A, Battery).
III - WHEN REPLACING THE INJECTION
COMPUTER
a The computer supplied as a spare part is not opera-
tional (also known as "blank").
a After replacing the injection computer, program it us-
ing the Diagnostic tool (see Technical Note
9869A, Procedure for programming and repro-
gramming the computer).
a Carry out the configuration and/or necessary pro-
gramming (see Fault finding - Replacement of
components) (17B, Petrol injection).