Specifications
19A-39
COOLING
Expansion bottle: Removal - Refitting
19A
- the expansion bottle bottom hose.
a Refit the following using the tool (Mot. 1448) or
« CLIC » clip pliers:
- the clamp of the top hose of the expansion bottle,
- the clamp of the bottom hose of the expansion bot-
tle.
a Fill the expansion bottle with coolant.
a Remove the hose clamps (Ms. 583).
a Refit the expansion bottle.
a Torque tighten the expansion bottle nuts (8 N.m).
III - FINAL OPERATION
a Top up the coolant level in the expansion bottle.
a Refit the expansion bottle cap.
a Bleed the cooling system (see 19A, Cooling, Cool-
ing system: Draining - Refilling, page 19A-6) .