Specifications

19B-7
EXHAUST
Exhaust: Precautions for the repair
19B
Before cutting the exhaust system, draw a line (D) be-
tween the two marks (P1) and (P2) .
The distance between the two marks on the exhaust
pipe is (X1) : 80 mm.
3 - Operate tool Mot. 1199-01
Fit the (Mot. 1199-01) (1) on the exhaust pipe.
Tighten the two bolts on the tool until they touch the
pipe in order to clamp the tool onto the pipe.
Turn the cutting tool using the handle and pressing it
against the pipe (as indicated in the diagram above).
Tighten the two bolts on the tool whilst cutting, until the
pipe is completely cut.
Once the pipe is cut, file and deburr the end of the pipe
to be used on the vehicle again.
4 - Positioning the exhaust sleeve
100649
14747
102118
Note:
Do not over-tighten the tool onto the pipe to avoid
deforming it.
WARNING
Do not reuse an old exhaust sleeve.