Specifications

19C-1
TANK
Fuel tank: Draining
19C
DRAINING
I - DRAINING PREPARATION OPERATION
a Disconnect the battery (see Battery: Removal - Re-
fitting) (80A, Battery).
II - DRAINING OPERATION
a Disconnect the fuel supply union from the injector
rail (1) .
a Fit a T-union (Mot. 1311-08) at (2) .
a Connect a pneumatic transfer pump for fuels to
the T-union outlet (3) .
a Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (02A, Lifting equipment).
Special tooling required
Mot. 1311-08 Union for taking fuel pres-
sure measurements.
Equipment required
pneumatic transfer pump for fuels
IMPORTANT
During this operation, be sure to:
- refrain from smoking or bringing red hot objects
close to the working area,
- be careful of fuel splashes when disconnecting the
union.
IMPORTANT
Wear leaktight gloves (Nitrile type) for this opera-
tion.
IMPORTANT
Wear goggles with side protectors for this opera-
tion.
WARNING
To prevent impurities from entering the circuit, place
protective plugs on all fuel circuit components
exposed to the open air.
WARNING
To avoid any corrosion or damage, protect the
areas on which fuel is likely to run.
K4M
145570
K9K