Specifications

10A-72
ENGINE AND CYLINDER BLOCK ASSEMBLY
Engine - gearbox assembly: Removal - Refitting
K9K, and 796
10A
II - REMOVAL OPERATION
a
a Position the (Mot. 1390) under the engine - gearbox
assembly.
a Remove the right-hand suspended engine mounting
(see 19D, Engine mounting, Right-hand sus-
pended engine mounting: Removal - Refitting,
page 19D-4) .
a Remove the nut (40) on the rubber pad support of
the left-hand suspended engine mounting.
a Strike the gearbox stud with a copper hammer to
separate the engine - gearbox assembly from the
body.
112813
112814
Note:
Ensure that the (Mot. 1390) is correctly posi-
tioned on the multifunction support at (39) .
107929