Specifications

10A-76
ENGINE AND CYLINDER BLOCK ASSEMBLY
Flywheel: Removal - Refitting
K4M
10A
a Screw in the new flywheel bolts without tightening
them.
a Lock the engine using the.
a Torque tighten in order the flywheel bolts (25 N.m
+ 50˚ ±±
±±
6˚).
a Remove the tool.
III - FINAL OPERATION
a Refit:
- the clutch pressure plate (see Pressure plate -
Disc: Removal - Refitting) ,
- the gearbox (see Manual gearbox: Removal - Re-
fitting) .
107913