Driver's Handbook

parking distance control........................(up to the end of the DU)
driving ...................................................(up to the end of the DU)
2.33
ENG_UD20377_1
Aide au parking (X81 - J81 - Renault)ENG_NU_932-3_X81ph3_Renault_2
Parking distance control
PARKING DISTANCE CONTROL
Operating faults
When the system detects an operating
fault there will be a 5-second, continu-
ous warning beep when reverse gear is
selected. Consult an approved dealer.
When the vehicle is being driven
at a speed below 7 mph (12 km/h),
certain noises (motorcycle, lorry,
pneumatic drill, etc.) may trigger the
beeping sound.
This function is an addi-
tional aid that indicates the
distance between the vehi-
cle and an obstacle whilst
reversing, using sound signals.
Under no circumstances should it
replace the driver’s care or respon-
sibility whilst reversing.
The driver should always pay atten-
tion to sudden incidents during driv-
ing: always ensure that there are no
moving obstacles (such as a child,
animal, pram, bicycle, etc.) or small,
narrow objects such as stones or
posts in your path when manoeu-
vring.
Operating principle
Ultrasonic detectors, installed in the
front or rear bumper depending on the
vehicle, measure the distance between
the vehicle and an obstacle whilst re-
versing.
This measurement is indicated by
beeps which become more frequent the
closer you come to the obstacle, until
they become a continuous beep when
the vehicle is approximately 32 centi-
metres from the obstacle.
Special features
Ensure that the ultrasonic sensors are
not obscured (by dirt, mud, snow, etc.).