Driver's Handbook

3.50
ENG_UD20397_1
Fonctionnalité des sièges arrière (X81 - J81 - Renault)ENG_NU_932-3_X81ph3_Renault_3
REAR SEATS: FUNCTIONS (4/4)
To fit a seat
The seats can be adjusted to your pre-
ferred position on the rails.
Place the seat on the rails.
The seat automatically locks itself onto
the nearest notch when placed on the
rails.
Check that the seat is locked correctly
by moving it from left to right and then
forwards and backwards.
Note: if the seat does not lock back
onto the rails correctly, pull on release 6
again to reload the system.
Accessing rear seats:
Lift control 2, handle 3 or pull on re-
lease 6 to move the seat forward and
free up access to the rear seats.
Leaving the vehicle from the rear
seats
Pull on release 6 and push the seat to-
wards the front. The seat will go for-
ward, creating access to the door.
You can also increase the amount of
space by pulling down the seatback
using release 5.
For safety reasons, after a
seat has been fitted, check
that it is correctly locked
into place by moving it from
left to right and forwards and back-
wards. If there is still a problem,
contact an approved dealer.
For safety reasons, carry
out these operations when
the vehicle is stationary.
2
3
4
5
6
C
When moving the rear
seats, ensure that nothing
obstructs the anchorage
points (passenger’s arm or
leg, a pet, gravel, cloth, toys, etc.).