Driver's Handbook

hubcap tool ............................................................(current page)
wheelbrace ............................................................(current page)
tyres .......................................................................(current page)
wheels (safety) ......................................................(current page)
trims .......................................................................(current page)
tyres .......................................................................(current page)
5.8
ENG_UD20692_3
Bloc outil (X81 - Renault)ENG_NU_932-3_X81ph3_Renault_5
Wheel trim - Wheel
TOOL KIT (2/2)/WHEEL TRIM - WHEEL
Screwdriver handle 8
Two screwdriver heads 9
Comprising four different tips.
Ratchet spanner 10
Jack extension piece 11
Hubcap tool 12
Assembling the wheelbrace
Use jack extension piece 11, ratchet
spanner 10 and its extension piece 7.
Screw extension piece 7 into the
handle of the ratchet spanner until the
extension piece tabs click securely into
position.
12
11
10
9
8
7
11
10
7
Nothing should be placed
on the floor area in front of
the driver as such objects
may slide under the pedal
during braking manoeuvres, thus
obstructing its use.
Wheel trim
Remove the wheel trim using hubcap
tool 3 (located in the tool kit) by fit-
ting the hook into one of the openings
around the edge of the wheel trim.
To refit it, align it with valve 2. Push the
retaining hooks in fully, starting with
side A near the valve, followed by B
and C, finishing at D opposite the valve.
D
3
C
A
2
B
1