Driver's Handbook

tool kit ................................................... (up to the end of the DU)
hubcap tool ........................................... (up to the end of the DU)
jack ....................................................... (up to the end of the DU)
puncture................................................(up to the end of the DU)
wheelbrace ........................................... (up to the end of the DU)
wheelbrace ............................................................ (current page)
5.7
ENG_UD25402_1
Outils / enjoliveur (X95 - J95 - R95 - Renault)ENG_NU_969-1_JR95_Renault_5
Hubcap tool 4
This tool is used to remove the wheel
trims.
Bolt guide 5
For tightening/loosening wheel bolts on
vehicles fitted with alloy wheels
Towing hitch 6
Refer to the information on “Towing” in
Section 5.
The presence of the tools depends on
the vehicle.
Wheelbrace 1
Allows the wheel bolts to be locked/un-
locked.
Jack 2
Fold it correctly before refitting it in its
housing (ensure that wheelbrace 3 is
correctly positioned).
Tool kit (jack, wheelbrace, etc.)
TOOLS (1/2)
2
1
4
6
5
3
Do not leave the tools un-
secured inside the vehicle
as they may come loose
under braking. After use,
check that all the tools are correctly
clipped into the tool kit, then posi-
tion it correctly in its housing: risk of
injury.
If wheel bolts are supplied in the
tool kit, only use these bolts for the
emergency spare wheel: refer to the
label affixed to the emergency spare
wheel.
The jack is designed for wheel
changing purposes only. Under no
circumstances should it be used for
carrying out repairs underneath the
vehicle or to gain access to the un-
derside of the vehicle.