Driver's Handbook

lights
front ................................................. (up to the end of the DU)
lights
changing bulbs ................................ (up to the end of the DU)
changing a bulb .................................... (up to the end of the DU)
indicators .............................................. (up to the end of the DU)
bulbs
changing ......................................... (up to the end of the DU)
lights:
dipped beam headlights .................. (up to the end of the DU)
lights:
direction indicators ..........................(up to the end of the DU)
lights:
main beam headlights ..................... (up to the end of the DU)
bulbs
changing ......................................... (up to the end of the DU)
5.14
ENG_UD25150_1
Projecteurs avant : remplacement des lampes (X95 - J95 - R95 - Renault)ENG_NU_969-1_JR95_Renault_5
Headlights (changing bulbs)
FRONT HEADLIGHTS: changing bulbs (1/3)
1
3
Daytime running light
(depending on the vehicle)
Remove cover B, turn bulb holder 3 to
release it then replace the bulb.
Daytime running light bulb type:
P21LL.
Discharge bulb main beam
headlights/dipped beam
headlights
Never open cover A
Bulb type: D1S.
2
A special mounting is re-
quired to fit this type of
headlight, it is forbidden to
fit a headlight with xenon
bulbs to a vehicle which was not
designed for it.
Due to the danger involved
in handling high-voltage de-
vices, this type of bulb must
be replaced by an approved
dealer.
Direction indicator lights
Unscrew bulb holder 1 to release it and
then replace the bulb.
Bulb type: PY21W.
Front side light
Remove cover B, pull on bulb holder
wire 2, remove the bulb and replace it.
Bulb type: W5W.
The engine may be hot
when carrying out opera-
tions in close proximity. In
addition, the engine cooling
fan can come on at any moment.
Risk of injury.
The bulbs detailed below can be re-
placed. However, we recommend that
these be replaced by an approved
Dealer if this proves difficult.
A B
Deactivate the Stop and
Start function for any opera-
tion performed in the engine
compartment.