Operation Manual

2.19
ENG_UD29759_3
Régulateur-limiteur de vitesses : fonction limiteur (X61 - F61 - K61 - X61 BUp - Renault)ENG_NU_813-11_FK61_Renault_2


It is possible to exceed the limit speed
at any moment. To do this: press the
accelerator pedal 
(beyond the kickdown point).
Whilst the speed is being exceeded,
the cruising speed displayed on the in-
strument panel flashes.
Then, release the accelerator pedal:
the speed limiter function will return as
soon as you reach a speed lower than
the stored speed.

When driving down a steep gradient,
the system is unable to maintain the
limit speed: the stored speed will flash
on the instrument panel information dis-
play to inform you of this situation.
The speed limiter function is
in no way linked to the brak-
ing system.

When a limited speed has been stored
and this speed is not reached, driving is
similar to driving a vehicle without the
speed limiter function.
Once you have reached the stored
speed, no effort on the accelera-
tor pedal will allow you to exceed
the programmed speed except in an
emergency (refer to information on
“Exceeding the limit speed”).

The limit speed may be changed by re-
peatedly pressing:
switch 2 (+) to increase the speed;
switch 3 (-) to decrease the speed.