Operation Manual

2.28
ENG_UD14843_2
Boîte automatique (X61 - Renault)ENG_NU_813-11_FK61_Renault_2
Jaune Noir Noir texte

   if the message
“Check gearbox” and the
©
warning light appear on the instru-
ment panel, this indicates a fault.
Contact your approved Dealer as
soon as possible.
   if the message
“Gearbox overheating” appears on
the instrument panel, drive at a mod-
erate speed and avoid leaving the
lever in the  (or ) position, where
traffic conditions allow: always return
to the  position when you stop.
Contact your approved Dealer as
soon as possible.
      
 refer to the
information on “Towing” in Section 5.


With the selector lever 1 in position ,
move the lever to the left. Shifting the
lever repeatedly allows you to change
gears manually:
– To move down through the gears,
push the lever backwards;
– To move up through the gears, push
the lever forwards.
The gear selected is displayed on the
instrument panel.

In certain driving conditions (eg.:
engine protection, operation of the
Electronic Stability Program) the auto-
mated system may change the gear au-
tomatically.
Likewise, to prevent incorrect manoeu-
vres, a gear change may be refused by
the automatic system: in this case the
gear display flashes for a few seconds
as a warning.


When driving, leave the lever in posi-
tion , keeping the accelerator pedal
lightly depressed to ensure automatic
gear changes at comparatively low
engine speeds.
An impact to the underside of the vehicle (e.g.: striking a post, raised kerb
or other street furniture) may result in damage to the vehicle (e.g.: defor-
mation of an axle).
To avoid any risk of accident, have your vehicle checked by an approved
dealer.