Operation Manual

bulbs
changing ......................................... (up to the end of the DU)
changing a bulb .................................... (up to the end of the DU)
front lights
changing bulbs ................................ (up to the end of the DU)
bulbs
changing ......................................... (up to the end of the DU)
lights:
dipped beam headlights ................................... (current page)
lights
changing bulbs ................................ (up to the end of the DU)
lights
front ................................................. (up to the end of the DU)
5.15
ENG_UD25826_4
Projecteurs : remplacement des lampes (X61 - F61 - K61 - Renault)ENG_NU_813-11_FK61_Renault_5
Headlights: changing bulbs
The bulbs are under pres-
sure and can break when
replaced.
Risk of injury.
Dipped beam/main beam
headlights
Turn cover 1 a quarter of a turn to
unlock it.
Disconnect the wiring.
Remove rubber protector 2.
Unclip spring 3 to remove the bulb.
LIGHTS: changing bulbs (1/2)
1
2
3
Do not touch the bulb glass. Hold it
by its base.
To refit it, carry out the above opera-
tions in reverse order.
Ensure that rubber protector 2 is re-
positioned correctly so that the three
strips can be seen.
The engine may be hot
during operations in close
proximity. In addition, the
engine cooling fan may
start at any moment.
Risk of injury.
Deactivate the Stop and
Start function for any opera-
tion performed in the engine
compartment.
Bulb type: H4
It is essential to use 55W anti UV bulbs
to prevent damage to the lights' plastic
glass.