Operation Manual

1.15
ENG_UD29319_4
Appuis-tête avant (X61 - F61 - K61 - Renault)ENG_NU_813-11_FK61_Renault_1

Raise it to its highest position. Press
button 4 and lift the headrest to release
it.
 when the headrest is removed,
take care not to change the positions
of the rods.

If the setting of the rods has been al-
tered, pull them fully upwards. Take
care to ensure they are clean and cor-
rectly aligned and, if there are any prob-
lems, check that the notches are facing
forwards.
Insert the headrest rods into the holes
(tilt the seatback backwards if neces-
sary).
Lower the headrest until it locks, press
button 3 and lower the headrest as far
as possible.

B

Pull it upwards to the required height.

Press button 3 and guide the headrest
down to the desired height.
The headrest is an impor-
tant safety component:
ensure that it is in place
and in the correct position.
The distance between your head
and the headrest should be as small
as possible. The top of your head
should be in line with the top of the
headrest.