Operation Manual

headlight beam adjustment ..................(up to the end of the DU)
lights
adjustment ......................................(up to the end of the DU)
1.73
ENG_UD6424_2
Réglage électrique de la hauteur des faisceaux (X61 - F61 - K61 - Renault)ENG_NU_813-11_FK61_Renault_1
Réglage électrique de la hauteur des faisceaux

Control knob 1 is used to adjust the
height of the headlight beams accord-
ing to the load.
Turn control knob 1 downwards to
lower the headlights and upwards to
raise them.
Unladen, control knob 1 should be at 0.
When the vehicle is partially or com-
pletely laden, the headlight beam
should be set to light the road at be-
tween 50 and 100 metres. Then use
positions 1 to 4 on the control knob.
 


A Incorrect setting: the lights are set
too high and could dazzle other
drivers. Turn the control knob
downwards to lower the beam.
B Correct setting: the beam’s maxi-
mum range is between 50 and 100
metres.
