Operation Manual
gear lever...............................................................(current page)
changing gear .......................................(up to the end of the DU)
reverse gear
selecting ..........................................(up to the end of the DU)
2.7
ENG_UD23037_3
Levier de vitesses (X61 - F61 - K61 - Renault)ENG_NU_813-11_FK61_Renault_2
Gear lever
(vehicle stationary)
follow
the grid drawn on knob 1, and depend-
ing on the vehicle, lift ring against the
gear lever knob to select reverse.
refer
to the information on the “Automatic
gearbox” in Section 2.
The reversing lights will come on as
soon as reverse gear is selected (with
the ignition on).
An impact to the underside
of the vehicle (e.g.: striking
a post, raised kerb or other
street furniture) may result
in damage to the vehicle (e.g.: de-
formation of an axle).
To avoid any risk of accident, have
your vehicle checked by an ap-
proved Dealer.
When stationary and de-
pending on the slope and/or
vehicle load, it may be nec-
essary to pull up the hand-
brake at least two extra notches and
engage a gear (1
st
or reverse gear)
for vehicles with a manual gearbox
or position for vehicles with an au-
tomatic transmission.