Emulation Pod for M30240 Group MCUs User's Manual

( 24 / 58 )

Table 3.1 Switch settings of M30240T-RPD-E

Signal Switch Setting Description

Connects the LPF pin to the LPF circuit in the pod.

JP1

TLPF BLPF

JP1

TLPF BLPF

(Factory-setting)

JP2

BXCAP TXCAP

(Factory-setting)

JP2

BXCAP TXCAP

JP3

BYPASS FILTER

(Factory-setting)

JP3

BYPASS FILTER

JP4

FILTER BYPASS

JP4

FILTER BYPASS

(Factory-setting)

LPF JP1

XCAP JP2

D+ JP3

D- JP4

Connects the LPF pin to the target system.

Connects the XCAP pin to the XCAP circuit in the

pod.

Connects the XCAP pin to the target system.

Connects the D+ pin directly to the target system.

Connects the D+ pin to the target system via the

FILTER circuit in the pod.

Connects the D- pin directly to the target system.

Connects the D- pin to the target system via the

FILTER circuit in the pod.

* For the connection diagram of the peripheral circuit of the emulation pod M30240T-RPD-E, refer

to "5.2 Connection Diagram" (page 43).

CAUTION

Note on Changing the Setting of Switches:

• Set the JP3 and JP4 to the same direction (FILTER side or BYPASS side).