Emulation Pod for M30240 Group MCUs User's Manual

( 25 / 58 )

3.3 Selecting Clock Supply

There are two ways to supply a clock to the MCU, using the oscillator circuit of the emulation pod

or using the oscillator circuit on the target system. Table 3.2 lists the factory-settings of each clock

supply.

Table 3.2 Clock supply to the MCU

IMPORTANT

Notes on Changing the Clock Supply:

• The clock supply can be set by the Init dialog when starting up the emulator debugger

or inputting CLK command on the script window.

Clock Description Display of emulator debugger Default setting

IN-XOUT

Internal oscillator circuit of emulation pod

(OSC-2: 12MHz)

Target system

Internal

External

Yes