Emulation Pod for M30240 Group MCUs User's Manual

( 30 / 58 )
3.5 Connecting the PC4701 and Emulation Pod
To connect the emulation pod to the PC4701, use the FLX120-RPD 120-pin flexible cable included
with this product package.
(1) Connecting the Cable to the PC4701
Figure 3.9 shows how to connect the PC4701 and FLX120-RPD.
Connect the PC4701 side connector of FLX120-RPD to the cable connector of the PC4701. To
connect the FLX120-RPD, be sure to hold the both sides of the PC4701 side connector horizontally
with the "UPSIDE" facing up. Then, secure with screws the FLX120-RPD.
Figure 3.9 Connecting PC4701 and FLX120-RPD
CAUTION
Note on Connecting the Cable:
• Always shut OFF power before connecting the FLX120-RPD. The power ON state
could destroy internal circuits.
Note on Securing the Screws:
•After connecting the FLX120-RPD to the emulator main unit PC4701, be sure to
secure the screws mounted in both sides of the connector.