Emulation Pod for M30240 Group MCUs User's Manual

( 33 / 58 )
(2) Connecting 80-pin LCC Socket
When connecting the emulation pod to the 80-pin LCC socket (IC61-080-079, IC61-080-081, IC61-
0804-046 made by Yamaichi Electronics Co., Ltd.) on the target system, follow the procedure below.
(1) Connect the FLX100 to the FLX-80LCC.
(2) Connect the FLX-80LCC to the 80-pin LCC socket.
Figure 3.12 Connecting emulation pod to the 80-pin LCC socket
CAUTION
Notes on Connecting Target System:
• Take care not to attach the converter board in a wrong direction. It may cause a fatal
damage to the emulation pod.
• The small connector of FLX100 and FLX-80LCC are guaranteed for only 20
insertion/removal iterations.
• For purchasing the LCC socket (IC61-080-079, IC61-080-081, IC61-0804-046)
and for any inquiry for the LCC socket, contact Yamaichi Electronics Co., Ltd.