User manual

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microﬁlming, or the capture in electronic data

processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent

the technical status at the time of printing.

PC or MAC:

• You can also operate the converter board with a PC or MAC.

• In principle, installation and operation with a PC or MAC is the same as with the

Raspberry Pi

Please observe the special safety instructions in these operating instruc-

tions when installing the converter board in a computer.

Since the screw set is only intended for attachment to a Raspberry Pi

, make

especially sure that the converter does not cause a short-circuit in this case

(e.g. through contact with the PC housing).

When using the 5-pin connector (USB_P), also observe the operating in-

structions of your computer or main board for the correct allocation.

Disposal

Electrical and electronic equipment do not belong in the regular household

waste.

Dispose of the waste product in accordance with the applicable legal regu-

lations.

Technical data

Power supply ....................................... via micro USB 2.0 connector (USB_M), 5-pin con-

nector (USB_P) or via the external 2-pin connec-

tor (PWR)

Operating voltage................................5 V/DC

Supported operating systems ........... Windows

XP from SP1 (only 32 bit), Windows

Vista

™

, Windows

7, Windows

8; Windows

8.1

(32 and 64 bit); Windows

RT; MacOS, Linux

Connectors ........................................... micro USB 2.0 connector; mSATA port; 5-pin USB

connector; external 2-pin connector for power

supply

Supported standards ..........................USB 2.0; SATA III, SATA II, SATA I, max. 6.0 Gbit

Supported devices .............................mSATA-SSD

Dimensions (L x W x H) ......................66 x 56 x 12 mm

Weight ...................................................18 g (only the board)

Operating conditions ..........................5 °C to +50 °C; 20% to 80% relative humidity

Storage conditions..............................-25 °C to +70 °C; 20% to 80% relative humidity