Instructions

9. Status tones and LED prompts

By default, the internal buzzer and the MAIN LED indicator produce the following signals:

Status Audio signal* LED indicator

1 Program mode - - - Constant

2 Correct key 1 audio tone 1ash

3 Correct code 2 audio tones 2ashes

4 Incorrect code 5 audio tones 5ashes

5 DAP jumpers are not set Continuous audio tone Constant

6 Standby mode - - - Flashes (0.5 Hz)

7 Output relay enabled Continuous tone for one

second**

- - -

* Use program code 83 to enable/disable the audio tones.

** Use program code 81 to enable/disable the output activation signal.