Instructions
11. Settings and programming
Prerequisites
• Thekeypadmustbeplacedinprogrammingmodeinordertocongurethesettings.
• All settings data is saved to a non-volatile memory. This means that the data is not deleted
when the code lock is switched off.
• Do not turn off the power supply when you are programming the keypad, as this may corrupt
the memory.
a) Enabling/disabling programming mode
The master code is required to enable programming mode.
1. Toenableprogrammingmode,enterthemastercodeandconrmyourentrywiththe*key,
The default master code is 0000.
Master code Conrm
0 0 0 0 * The keypad is now in programming mode.
2. Usethecodeoverviewtocongurethesettings.Youcancongurethesettingsonebyone.
3. Whenyou havenishedconguring the settings,press the *button to exitprogramming
mode.
Forsecurityreasons,changethemastercodewhenyoucongurethecodelockfor
the rst time. The old master code will be automatically deleted.If you forget the
master code, use the DAP jumper to enable programming mode.
20