Instructions

For more information about user codes, refer to section C-1 in “Overview”.

Refertothe“Overview”sectionforinformationaboutmanualandautomaticconrmationmode.

Programming examples

1. Enter the master code and press the * key to enable programming mode. In this example, the

master code is 3289.

3 2 8 9 *

2. Set the user code for output 1 to 8321. In the example, the user ID is 01.

1 0 1 8 3 2 1 #

3. Set the user code for output 2 to 54321. In this example, the user ID is 1.

2 1 5 4 3 2 1 #

4. Set the user code for output 3 to 927053. In this example, the user ID is 1.

3 1 9 2 7 0 5 3 #

5. Press the * key to exit programming mode.

Instructions

1. Press the following: 8 3 2 1 # Output 1 is enabled

2. Press the following: 5 4 3 2 1 # Output 2 is enabled

3. Press the following: 9 2 7 0 5 3 # Output 3 is enabled