Instructions

e) Programming the super user code

The super user code is a multitasking code which can be used to enable outputs 1, 2 and 3 at

the same time. It can also be used to access the special features of output 1.

Program code Super user code Conrm

45 4–8 digits #

• Thesuperusercodecanbe4–8digitslong.Inautomaticconrmationmode,thesuperuser

code must have the same number of digits as the master code.

• The super user code and the door opener are independent of all lock systems. You can open

the door at any time.

• For more information about the super user code, refer to section C-2 in “Overview”.

• Refertothe“Overview”sectionformoreinformationaboutmanualandautomaticconrma-

tion mode.

Programming example

1. Enter the master code and press the * key to enable programming mode.

In this example, the master code is 3289.

3 2 8 9 *

2. Set the super user code to 2580.

4 5 2 5 8 0 #

3. Press the * key to exit programming mode.

Instructions

1. Enabling/disabling output 1, 2 or 3

The super user code functions like the user codes. Enter the code together with the number

of the output that you want to enable or disable. The super user code can be used to reset an

output that is enabled for a preset duration.

2 5 8 0 # 1 Enable/disable output 1

2 5 8 0 # 2 Enable/disable output 2

2 5 8 0 # 3 Enable/disable output 3