Instructions

2. Using output 1 to override the door lock

Output 1 monitors the door lock. It is possible to keep the door locked, even when a code is

entered. This may be useful during holidays. It is also possible to keep the door unlocked. This

featurecanbeconguredusingthefollowingcode:

2 5 8 0 # 7 Door is locked/unlocked

• The LED indicator for output 1 (green) turns on when the door is unlocked.

• Only use this feature if you are using the door lock in fail-safe mode.

Do not forget to disable this feature when it is no longer required. When you use the

super user code to keep the door lock open, the door sensor features and the user

codes are temporarily disabled. To re-enable these features, enter the super user

code again.

The following features are temporarily disabled:

• Automatic door relocking

• Forced door alarm

• Open door alarm

• Communications output

• All user codes for output 1 (including the super user code)

• Emergency code for output 1

3. Disabling user codes for output 1

Astheowner,youcanmanuallydisableusercodes(e.g.tocheckthatyourstaffobserveofce

hours). Use the following code to enable/disable this feature:

2 5 8 0 # 9 The user codes are disabled/enabled

• You can only disable all user codes; it is not possible to disable individual codes.

• For security reasons, the door opener and the super user code remain enabled until output

1 is disabled.

• The red LED indicator turns on when output 1 is disabled.

• Disabling output 1 does not affect outputs 2 and 3.