Instructions
Instructions
1. Enter the four-digit user code to enable output 1 and the emergency output.
3 3 5 7 #
2. Entertheve-digitusercodetoenableoutput1andtheemergencyoutput.
2 3 9 8 0 #
3. Enter a normal user code to disable the emergency output (1357 in this example).
1 3 5 7 #
The emergency output stays enabled until it is disabled with a user code or the super
user code.
g) Conguring the visitor code
Visitorcodesworklikeusercodes.Theycanbeprogrammedforsingleuseorforaspecied
time period.
• Visitorcodescanbe4–8digitslong.Inautomaticconrmationmode,thevisitorcodemust
have the same number of digits as the master code.
• You can save up to 10 visitor codes (user IDs 0 to 9).
• Validity period:
0 Single-use code: There is no time limit, but the code can only be used once.
01 to 99 Time limit in hours: Set the duration for which the code will remain valid (1–99
hours).
• All visitor codes will be deleted when the power supply is disconnected.
• For more information about visitor codes, refer to section C-4 in “Overview”.
• Refertothe“Overview”sectionformoreinformationaboutmanualandautomaticconrma-
tion mode.
27