Instructions

Example:

User code: 54321, start code: 543

User code: 927053, start code: 927

Example

1. Enter the master code and press the * key to enable programming mode. In this example, the

master code is 3289.

3 2 8 9 *

2. Enable output 1 for 5 seconds

4 0 5 #

3. Enable start/stop mode for output 2

5 1 #

4. Enable start/stop mode for output 3 with a 3-digit start code

6 3 #

5. Press the * key to exit programming mode.

Instructions

1. Enable output 1 for 5 seconds: Enter the corresponding user code (8321 in this example).

8 3 2 1 # Output 1 is enabled for 5 seconds

Enable start/stop mode for output 2: Enter the corresponding user code (54321 in this example).

5 4 3 2 1 # Output 2 is in start/stop mode

3. Enable start/stop mode for output 3 with a 3-digit start code: Enter the corresponding user

code (927053 in this example).

9 2 7 # Enter the 3-digit start code to enable output 3.

9 2 7 0 5 3 # Enter the entire user code to disable output 3.