Instructions

n) Conrmation mode
You canconrm codeentriesmanually withthe #key,or youcanset thecode lockto con-
rmthemautomatically.Usingmanualconrmationmodepreventstheuserfromguessingthe
length of the user code.
Program code Function Conrm
8 2 0 or 1 #
Options
0 Manualconrmationmode(defaultsetting):Afterenteringausercode,pressthe#keyto
conrmyourentry.Inthismode,theusercodescanbe4–8digitslong.Theusercodesdo
not need to have the same number of digits as the master code.
1 Automaticconrmationmode:Youdonotneedtopressthe#keytoconrmyourentry.The
user codes must have the same number of digits as the master code. For example, if the
master code is 5 digits, the user codes must also be 5 digits.
o) Status tones
The status tones indicate whether the correct code was entered. The status tone settings do not
affecttheopendoornoticationtones(programcode81).
Program code Function Conrm
8 3 0 or 1 #
Options
0 All status tones are disabled. This setting is recommended for quiet environments.
1 The status tones are enabled. The keypad will beep when the correct code is entered. If you
enterthewrongcode,thekeypadwillbeepvetimes(defaultsetting).
35