User manual

ManualsBrandsRENKFORCE ManualsMP3 & MP4 AccessoriesBluetooth speaker4.0;"AdventureWheel1" Handsfree, spray-proof, Aux;Black-red

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method (e.g. photocopying, microlming, or the capture in

electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.

This publication represents the technical status at the time of printing.

c) Pairing the speaker with a Bluetooth

device

• Before you can play audio, the speaker needs to be paired with a Bluetooth

device.

• Place the speaker and your Bluetooth

audio device at a distance of approximately 1 m from

one another and avoid interferences that may affect signal transmission (for example, do not

place the devices near strong electromagnetic elds or metal objects or behind reinforced

concrete walls).

• Ensure that Bluetooth

is enabled and that the Bluetooth

device that you want to pair has all

of the necessary Bluetooth

drivers. Visit the manufacturer's website to download and install

the latest drivers.

• Turn on the Bluetooth

device and enable pairing mode (if necessary).

• Follow the instructions for your Bluetooth

device to pair it with the speaker. These may vary

depending on the manufacturer and design. Your device will search for available Bluetooth

devices.

• Press the multifunction button (8) to turn the speaker on and enable pairing mode. The LED

indicator (7) will ash white.

• Select "TWNT-BOS100" on your audio device (e.g. mobile phone, laptop) to pair it with the

speaker.

• You may be prompted to enter a password. Enter the password (or try using "0000") and

conrm your entry.

• The LED indicator (7) will stay constant when the devices are paired via Bluetooth

, and the

speaker will play a notication tone.

• If the devices do not pair within 2 minutes, turn off the speaker and try pairing the devices

again.

d) Wired audio playback

• If your audio device does not support Bluetooth

, you can connect it to the speaker using the

3.5 mm jack cable.

• Insert the 3.5 mm jack cable into the analogue jack input (1) on the speaker and the audio

output (line out) on your audio device. The LED indicator (7) will start to ash slowly. If the

speaker is paired with another device, the Bluetooth

connection will be terminated.

• Start playback on your audio device.

• Use the controls on the speaker or your audio device to control playback, volume settings

and other functions.

• The Bluetooth

connection is automatically terminated when the 3.5 mm jack cable is

inserted into an audio device.

e) Button functions

Button Function

Multifunction button Multifunction button (8)

Press and hold for 3 seconds to turn the speaker on.

Press and hold for 3 seconds to turn the speaker off.

Press to pause or resume playback.

Press to answer or end a call.

Press and hold for 3 seconds to reject an incoming call.

Volume - This button (5) skips to the previous track in the playlist. Press and

hold to decrease the volume.

Volume + This button (6) skips to the next song in the playlist. Press and hold to

increase the volume.

f) Answering/ending/rejecting phone calls

• When the speaker is paired with a mobile phone and you receive an incoming call, the current

track will be paused and the speaker will play a ringtone.

• Press the multifunction button (8) to answer the call. To reject the call, press and hold

the multifunction button for 3 seconds. For best results. speak in the direction of the

microphone (9).

• Press the multifunction button (8) to end a call. You can also use the onscreen controls on

your mobile phone to answer/end a call.

g) Troubleshooting

• If some features do not work properly, ensure that all of the necessary Bluetooth

drivers are

installed and up-to-date.

• Please note that some audio devices (e.g. smartphones) may not support the remote-

controlled features on the speaker. Check the list of features for your device (the AVRCP

protocol must be supported) and visit the website of your smartphone manufacturer. Updating

your device may help to resolve the issue.

• If there is no sound, try increasing the volume. If the issue persists, re-establish the Bluetooth

connection or pair the devices again.

• If the sound is distorted, ensure that the audio device and speaker are within 10 m of each

other and check that there are no sources of interference.

Care and cleaning

• Always disconnect the product from the power supply before cleaning it.

• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these may

damage the casing or cause the product to malfunction.

• Use a dry, lint-free cloth to clean the product.

• Do not clean the product by immersing it in water.

Declaration of Conformity (DOC)

Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declares that this

product conforms to the 2014/53/EU directive.

Click on the following link to read the full text of the EU declaration of conformity:

www.conrad.com/downloads

Select a language by clicking on a ag symbol, and then enter the product order

number in the search box. The EU Declaration of Conformity is available for

download in PDF format.

Disposal

Electronic devices are recyclable waste and must not be placed in household waste.

Always dispose of the product according to the relevant statutory regulations.

You thus fulll your statutory obligations and contribute to the protection of the environment.

Technical data

Input voltage/current ..................... 5 V/DC, 0.5 A

Rechargeable battery ................... 5 V/DC, 700 mAh (integrated Li-ion battery)

Output power ................................ 3 W (RMS)

Bluetooth

version ........................ BT 4.0

Range ........................................... Approx. 10 m

Frequency range (acoustic) .......... 120–18,000 Hz

Frequency range (electromagnetic) ....

2.4 GHz to 2.48 GHz

Signal-to-noise ratio ...................... 70 dB

Connections .................................. 3.5 mm jack

Battery life (standby) ..................... >360 Hours (with fully charged battery)

Charging time ............................... 3 hours

Battery life ..................................... 6 hours of playback at 50 % volume

Transmission power...................... 64 dBm

Sensitivity ..................................... 110 ±3 dB (at 1 kHz)

Distortion ...................................... 0.6 % @ 1W

Water resistance rating ................. IPX4

Charging cable length ................... 45 cm

Jack cable length .......................... 45 cm

Supported operating systems ....... Windows

2000, XP (Home, Pro, with SP1, SP2, SP3)

(32- bit), 10 (32/64-bit), Mac OS 10.7 to 10.10, Linux (5.0,

6.0), Android (3.0, 7.0), iOS 4, iOS 10.3.1, Blackberry 9530

Operating conditions ..................... 0 to +40 °C, 0–85 % relative humidity (non-condensing)

Storage conditions ........................ -30 to +60 °C, 0–90 % relative humidity (non-condensing)

Dimensions (W x H x D) ............... 110 x 90 x 55 mm

Weight .......................................... 187 g