Instructions

How to Connect to Smartphone

1. Make sure your device has BT HID or SPP profile

2. Turn off Power-Saving mode on your smartphone first

3. Then, choose HID or SPP profile and scans the following 2 setting

codes before connecting to smartphone.

(a1 à a2 or b1 à b2)

If you don’t know what profile your device is, please try HID

profile first, then, SPP profile.

HID profile

SPP profile

4. Please complete the connection procedures as the right photos.

5. After the connection is completed, the RED light will be OFF.

6. Before using WordPad file or appropriate APP, please set

keyboard language of device to User’s language. Then, scan

the barcodes and the barcode data will show on the cursor side.

Soft-Keyboard setting code for Android / iOS

For Android

For iOS

* Under Android system, if you want to raise/lower soft-keyboard, please read

the above setting code first. Then, press left button (refer to drawing #5 on

page #1) to raise keyboard (LED is RED /Bluetooth is offline), press it again

to lower keyboard (LED is off/ Bluetooth is online)

* It will take 5~10 seconds to make BT online/offline.

* Please be noted that when BT is offline, scanning function is

stopped.

* Or, switch “C” to “O” to make BT online. (Drawing 3, page #1)

* Under iOS system, press Left button to raise/lower soft-Keyboard;

* Press the left button for 4 seconds to un-pair. Then, scanner can be

connected with other BT devices

1. click the “Settings” 2. click “General”

3. click “Bluetooth”

4. Turn it ON, and search the

Devices

5. Select “Rxxxxxx” to connect

6. When see the “Connected” means

the connection is OK.

(example: pairing with iPhone)

Reset Configuration to Defaults

(scan from A1 to A4 for HID profile or B1 to B5 for SPP profile)

HID profile

SPP profile