Full Product Manual

Important Safety Instructions

Please save these instructions.

This manual contains important safety, installation, and operating instructions for the

inverter. The following symbols are used throughout the manual:

WARNING: Indicates a potentially dangerous condition. Use extreme caution

when performing this task.

CAUTION: Indicates a critical procedure for safe and proper operation of the

inverter.

NOTE: Indicates a procedure or function that is important to the safe and proper

operation of the inverter.

General Safety Information

• Installation and wiring must comply with the Local and National Electric Codes

(NEC) and must be done by a certified technician.

• Read all of the instructions and cautions in the manual before beginning the

installation.

• There are no serviceable parts for this inverter. Do NOT disassemble or attempt

to repair the inverter.

• Make sure all connections going into and from the inverter are tight. There may be

sparks when making connections, therefore, make sure there are not flammable

materials or gases near installation.

Inverter Safety

• The inverters are suitable for 12V Battery Banks ONLY.

• ALWAYS make sure inverter is in OFF position and disconnect all AC and DC

connecting when working on any circuit associated with the inverter.

• NEVER connect the AC output of the unit directly to an Electrical Breaker Panel/

Load Centre which is also fed from the utility power / generator.

• When connecting battery terminals, ensure the polarity of the battery connections

is correct. Incorrect polarity may cause permanent damage to the unit.

• Be careful when touching bare terminals of capacitors as they may retain high

lethal voltages even after power is removed.