Full Product Manual

*For this Renogy inverter, the battery bank will be 12 volts direct current (12 VDC)

Example

A Microwave = 700 Watts

12V battery bank

700 Watts to run microwave using the batteries as if it

was a 12VDC microwave requires 58 Amps

700 Watts / 12 Volts = 58 Amps

Load Operation = 3 hours

Now that amps have been determined, the amps hours

need to be determined. The microwave will be used for

approximately 3 hours a day.

58 Amps * 3 hours = 174 Ah

At least a 174 Ah battery must be selected in order to use the 700 Watt microwave at

3 hours a day. However, determining a battery size is also dependent on the battery

that is able to handle repeated discharge/charge cycles.

NOTE: This is just an example. Actual quantities vary by battery capacity and rates

of discharge.

NOTE: In the example above, the user would need to be using at least the Renogy

1000W Pure Sine Wave Inverter.

Grounding

The Renogy Pure Sine Wave inverters come equipped with a grounding lug for

appropriate grounding to earth ground or to another designated ground (For example, a

metal frame of an RV). The connections to ground must be tight and against bare metal.

Whether using the inverter in a mobile application, such as an RV or in a building,

grounding is highly recommended. The recommended wire size for grounding is 10

AWG insulated copper strand wire. For more information regarding grounding, users

and/or installers must consult with the Local and National Electric Codes (NEC) for

more specific grounding regulations and suggestions as they can change per scenario.