Full Product Manual

15
NOTE
AC Wiring
All AC Wiring should be approved by an electrician for RV or Marine applications. Do not
connect the AC Output to a power source like a generator/shore power. Irreversible
damage may occur.
Do not over-tighten the screws in the AC Terminal Cover or Terminal Block. The
recommended torque for the M3 terminal cover screws is .64 ~ 1.0N-m / 5.7 ~ 9.1 lbf-in
The recommended torque for the M4 terminal block is Max 0.98N-m / 8.7 lbf-in
You can plug your AC loads directly into the receptacles on the
inverter’s AC Side. You can also hardwire (permanently connect)
the AC output from the AC hardwire terminal through the AC
knockout into a load sub-panel or additional AC outlets powered
by the inverter. From left to right, the terminal block indicates:
Live/Hot (L), Neutral (N), and Ground (G).
WARNING
Live Neutral Ground
Red Green
Black
White
Light Grey Bare
Brown
Blue
Typical Colors for AC Wiring