How to Guide

LED Behavior Meaning

Power (Green)

GF (Yellow)

Solid The inverter is powered on (normal mode)

Inverter Overheating

Inverter Overload

Inverter Undervoltage

Inverter Overvoltage

Solid

Slow Flash

Operation

AC Side Operation

LED Overview

1.Connect electronic devices to electrical socket(s) on

inverter. Flip inverter power to ON position (on AC side)

2. When finished, switch AC devices off FIRST, then turn

off inverter switch

4. To power down, turn off the device first then proceed to

shut down the inverter

3. Turn the device’s power switch on to begin normal use

CAUTION

Avoid connecting powered on Devices before connecting to the inverter. Devices

in the ON position may trigger an overload as they might have a high initial startup

power when first connecting to the inverter.

Assuming proper connection, the inverter is now ready for use. To operate using the AC

Outlets:

The inverter has 3 LEDs that dictate different events: Power, Ground fault, and Fault.

Eco power saving mode. The inverter will pulse to

detect any AC loads above 50W.

Ground fault detection of an unintentional electric path

diverting current to ground.

Fault (Red)

+ Alarm

Solid