How to Guide

08
The Wired Remote Control for the inverter gives
users the opportunity to power on/off the inverter
from a distance. Giving you approximately 16.4ft of
distance, simply connect the cable to the REMOTE
port on the PGH unit. Make sure the inverter switch
is flipped to REM and the wired remote power
button is unpressed. When connected, press the
wired remote's power button to turn on the inverter.
The PGH1 inverter will include a wired remote controller that can power the inverter ON or
OFF. In addition, the 1000W and 2000W models will include inverter cables.
Inverter Model Gauge
1000W 4 AWG
2000W 4 AWG * 2
3000W Cables not included. 4/0 Recommended
Included Components
Wired Remote Control
The RMS-PGH is a high precision meter designed
for the PGH1 Power Saving Inverter Series. Utilize
the 2-key input to easily navigate through your
system information as well as identify any error
codes. You can also use the main push button to
power your inverter on/off at your convenience.
The RMS-PGH is the perfect monitor companion to
optimize any solar-inverter system!
Optional Components
Monitoring Screen
(Model: RMS-PGH)