Manual

12
Selecting the Battery Type
To change the battery type you will need to press the push button that is located on the PV+
and ALT+ side of the DCDC. The following chart indicates the Battery Type LED .
User mode is an extra feature accessed via App or Monitoring Screen; Future Development
NOTE
Connecting Battery Voltage Sensor
Connect the Battery Voltage Sensor connector to the BVS port. Connect the positive line to the
left side of the green housing and then connect the negative line to the right side of the green
housing. You will need to open the wire terminal utilizing the screws on top of the green
housing. You will then need to place the bare wire end onto the respective battery terminal for
accurate voltage sensing.
BVS+
BVS-