Quick Guide

1212
Installation
Mounting
z
Please make sure that the battery charger is installed firmly to prevent it from falling off.
DC-DC Battery Charger
DC-DC Battery Charger
STEP-5.1
Place the battery charger
against a flat surface and
secure it with included
screws.
Temperature Sensor
z
The temperature sensor can detect the battery's temperature and update it to the battery
charger for charging voltage calibration. This ensures the battery charger (with operating
temperature range from -20
°C
to 60
°C
or -4
°F
to 140
°F
) can charge the battery normally.
z
Do not use the temperature sensor on a LiFePO4 (LFP) battery which comes with a battery
management system (BMS).
z
Please refer to the user manual of battery charger at renogy.com for more matters needing
attention.
IGN
CAN CAN
BVS BTS
IGN
CAN
BVS BTS
STEP-6.1
+
-
STEP-6.2
Insert the temperature sensor terminal block into the BTS port
of the battery charger.
Adhere the sensor on the
top or side of the battery with
insulation tape.