Quick Guide

1313
Installation
*Voltage Sensor (Optional)
The Battery Voltage Sensor is the perfect solution by providing an accurate battery voltage to the
battery charger and allowing it to adjust the charging stage precisely resulting in overall extension
of your battery life.
z
Identify the polarity (positive and negative) on the cables used for the batteries. A reverse
polarity contact may damage the unit.
z
The voltage sensor ring terminal is M8 (Approx. 5/16"). If the battery bolt size is small, please
use a gasket to fix it to prevent it from falling off.
IGN
CAN CAN
BVS BTS
DC-DC Battery Charger
IGN
CAN
BVS BTS
STEP-7.1
Insert the voltage sensor
terminal block to the BVS
port.
+
-
+
-
REGO Battery
Normal Battery
with +/- Bolts
+
-
+
-
+
-
STEP-7.2
Connect the voltage sensor
ring terminal to the positive/
negative pole of the battery
system.